Search results

• DOAD
  '''Disk On A Disk''', which is a dump of a TI disk to a [[Disk images|disk image]] file. DOADs usually have a DSK extension.
  126 bytes (25 words) - 18:22, 24 July 2015
• Emulate File format
  ...th their HFDC system. They may be used in cases where the reference to the disk drive is hard-coded into the program, not allowing to run the program from ...the emulate file which it then uses to track the location of each virtual disk sector.
  1 KB (207 words) - 20:08, 5 June 2009
• Previous MESS HD conversion procedure
  ...linder/Head/Sector parameters to calculate the location of a sector on the disk. ...ges can produce the RAW data, allowing one to create a platter from a MESS image.
  3 KB (453 words) - 23:42, 8 December 2009
• MESS wish list
  In that case, it would be interesting to copy the screen image table to the clipboard. Pasting could be translated to a key press sequence === Tool to sync harddrive and image ===
  3 KB (463 words) - 00:23, 13 June 2015
• MESS media handling
  If you want to use a SCSI hard drive image in MESS, you cannot simply use your sector dump that you got from your orig ...mat]] and the [[Track Dump Format]]. There are two ways to get a blank new image file:
  4 KB (697 words) - 12:19, 8 April 2012
• MESS HD Preparation
  ''TODO: Someone to provide details how to dump a SCSI disk to Windows.'' ...e TI/Geneve family, we must try to make the HFDC emulation accept the SCSI image. This should not be too complicated, as both are working with the same sect
  5 KB (908 words) - 00:12, 9 December 2009
• Win994a
  Yes. The Win994a Disk Manager utility allows you to import/export PC text, FIAD and BASIC source # Load up your BASIC/XB program either from disk or by typing it in.
  4 KB (853 words) - 21:56, 12 November 2012
• TIDIR
  ...sent a TI file, or to represent a TI disk. There are several formats of TI Disk from single sided single density upwards, but the emulators use basically t ...ws you to create emulated TI disks and move files between them, or convert disk format. It can access files creates with Barry Boone's [[Archiver]].
  1 KB (232 words) - 10:22, 13 March 2017
• Troubleshooting
  Image:Vram_7f.png | Mask 01111111 Image:Vram_bf.png | Mask 10111111
  4 KB (680 words) - 19:41, 25 May 2021
• Sector Dump Format
  ...as a concatenation of all sector contents in logical sequence. These disk image files are typically suffixed with ".dsk" or ".DSK". Note that the [[Track D ...e ''physical sequence'' of sectors per track. The sectors on a real floppy disk are arranged by an interleave per track, with a skew from track to track. S
  5 KB (658 words) - 22:24, 11 November 2022
• FlashROM99
  To begin, copy up to 171 cartridge image files onto an SD or SDHC card. Switch off the TI 99 and plug in the FlashRO ...vailable some other languages, although the various forths still require a disk system.
  3 KB (491 words) - 04:03, 10 March 2019
• Track Dump Format
  ...p Format is used in the PC99 emulator. It contains all data bytes from all disk tracks. Unlike the [[Sector Dump Format]], this format stores the tracks "t * the first half of the image contains tracks 0 to 39 of side one
  14 KB (1,952 words) - 20:11, 30 July 2018
• Disk images
  [[File:Diskette.png|thumb|left|Structure of data on a floppy disk]] The image shows two '''tracks''', the outermost track, and the next one in the direct
  4 KB (745 words) - 17:41, 5 April 2011
• GRAM Kracker format
  The main uses cases why one would like to save the cartridge contents to disk are: * Using disk images prevents wear on the TI-99/4A cartridge slot.
  3 KB (449 words) - 08:42, 10 April 2016
• Formats
  ...RAM Kracker format]]. This format was introduced for copying cartridges to image files so that their contents could be altered, they could be loaded into ex === Disk images (DSK) ===
  4 KB (637 words) - 17:51, 30 April 2018
• Classic99
  ...the ability to also use a 'filter' to make the output look more like a TV image. ...nd variable length filenames, as well as removing the limit on files on a 'disk'. (In practice some TI programs will still limit filename length).
  3 KB (564 words) - 18:02, 11 December 2020
• MESS non-problems
  == Console reset when loading from disk in Editor/Assembler == ...is unreadable in some areas. Either there are actually bad sectors, or the disk controller cannot read this format.<br/>
  5 KB (791 words) - 00:26, 13 June 2015
• PC99
  ==Changing disk (eg dsk1) whilst PC99 is running== Now key in the path from where PC99 is to the disk using dos format
  5 KB (839 words) - 10:11, 31 October 2016
• Setting up the Horizon Ramdisk
  ...MiB of SRAM. The emulation will respond to the equivalent speed of the RAM disk on actual hardware. ...will be limited to 1600. ROS 8.32 and higher allows for 3200 sectors per disk.</div>
  5 KB (827 words) - 12:07, 29 August 2016
• Advertiser
  ...P ram for itself, the VDP memory check by Advertiser did not work and if a disk system was attached users had to type CALL FILES(9) followed by NEW to set ...amended to load easily into the FG99 module by adding a second grom to the image, containing a menu entry and an autostart jump to the title screen, which
  2 KB (441 words) - 21:53, 26 March 2024

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)