Zero

From Ninerpedia
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Comparing variables against zero (0)

There is a bug which causes a problem if you program in TI BASIC:

If you use the split keyboard as follows:

100 CALL KEY(1,A,B)
110 IF A<>0 THEN 100
120 PRINT "YOU PRESSED KEY X"

If you press key X, using the split keyboard as above (the same is true with keyboard 2 and key M), you should expect the value of A to be zero and the program to go to line 120.

It doesn't.

To check the value of A really does go to zero try inserting another line:

105 PRINT A

When you press X now you see the value zero appear on screen but the comparison still fails.

Now amend line 110 to be:

110 IF A+1<>1 THEN 100

Mathematically the two lines 110 are equivalent, but in TI BASIC they do not behave the same.

This is not a problem in Extended BASIC (any version).

The difficulty is caused by the multiple ways that the radix-100 floating point system can represent a zero value. In particular, internally the comparison to zero (and only zero) should be made with only the first two bytes of a number. By changing the comparison to be with something other than 0, all bytes are compared and we do not have a problem.

Call it a bug or a feature, but if you program in TI BASIC you need to be aware of this. It also has the potential to cause a problem if you use radix 100 floating point in any other language.