Comparing variables against zero (0)
There is a bug which causes a problem if you program in TI BASIC:
If you use the split keyboard as follows:
100 CALL KEY(1,A,B) 110 IF A<>0 THEN 100 120 PRINT "YOU PRESSED KEY X"
If you press key X, using the split keyboard as above (the same is true with keyboard 2 and key M), you should expect the value of A to be zero and the program to go to line 120.
To check the value of A really does go to zero try inserting another line:
105 PRINT A
When you press X now you see the value zero appear on screen but the comparison still fails.
Now amend line 110 to be:
110 IF A+1<>1 THEN 100
Mathematically the two lines 110 are equivalent, but in TI BASIC they do not behave the same.
This is not a problem in Extended BASIC (any version).
The difficulty is caused by the multiple ways that the radix 100 floating point system can represent a zero value. In particular, internally the comparison to zero (and only zero) should be made with only the first two bytes of a number. By changing the comparison to be with something other than 0, all bytes are compared and we do not have a problem.
Call it a bug or a feature, but if you program in TI BASIC you need to be aware of this. It also has the potential to cause a problem if you use radix 100 floating point in any other language.