Difference between revisions of "Setting up the HSGPL for MAME"

From Ninerpedia
Jump to navigation Jump to search
Line 64: Line 64:


Now exit the emulation. Do not reset the emulator unless you have already unplugged the Editor/Assembler cartridge.
Now exit the emulation. Do not reset the emulator unless you have already unplugged the Editor/Assembler cartridge.
<div class="warn">MESSUI users (Windows): Please make sure that all cartridges are removed. In doubt, click on the "..." button and select ''unmount'' for each cartslot.</div>


When you restart, make sure you do not have any cartridge plugged in, or the HSGPL card will crash (which is a bug in the emulation). Check that you remove Editor/Assembler and that you do not have any -cart1 or similar as command line option.
When you restart, make sure you do not have any cartridge plugged in, or the HSGPL card will crash (which is a bug in the emulation). Check that you remove Editor/Assembler and that you do not have any -cart1 or similar as command line option.

Revision as of 20:43, 13 April 2011

Introduction

The HSGPL is a peripheral expansion expansion card created by the System-99 User Group (SNUG). It contains Flash ROM circuits and RAM circuits, so parts of its memory are persistent. The HSGPL is able to simulate 16 individual cartridges. They can be switched by the console-internal cartridge selection. The intended use is to dump a plugged-in cartridge on disk, and then to upload the data into one of the 16 banks.

In addition, the HSGPL replaces the GROMs in the console. When the card is plugged in, the console GROMs should be removed, or the card will not offer its complete functionality.

This also means that a completely blank HSGPL will not work. In that case, the TI system will immediately lock up with a black screen when turned on. The minimum contents of an HSGPL is a basic DSR and the console GROM contents. Each real HSGPL card is delivered with this minimum content.

The HSGPL emulation

In the TI part of the MESS emulator, the HSGPL card is emulated with the implementation to be found in machine/ti99/hsgpl.c. The complete circuitry is emulated by following the functional description (instead of utilizing the schematics and printed board layout). Since MESS does not provide ROM contents due to copyright restrictions, you have to get an own copy of the HSGPL DSR and initial memory contents. If you own an HSGPL you can dump the contents with your real TI and transfer them to the MESS TI emulation. Otherwise you should get in contact with the SNUG people and request a copy of the DSR.

You can select the HSGPL in the Driver Configuration menu. Locate the setting HSGPL extension and turn it on or off.

HSGPL extension       On

Once more, keep in mind:

If you activate the HSGPL extension without the initial ROM contents, the emulation will lock up. This is not an error - it perfectly mirrors the real happenings.

With the real hardware, you do not have to care about the initial setup. You cannot set up the card in-system; the flash ROMs have to be burned separately. After this initial procedure, you can certainly modify all contents (and, of course, render it unusable if you are careless enough).

Although in MESS we usually strive to stay with the real features as closely as possible, in this case we opted for a minor exception. The HSGPL emulation is slightly enhanced to its real counterpart by offering a special mode that allows us to upload an initial system without letting the empty card lock up out system. This mode can be selected as the HSGPL extension setting Flash:

HSGPL extension     Flash

Once you have uploaded the initial system you must set this switch to On in order to properly use the card.

Setting up Step-By-Step

In the following I will guide you through the setup process, picking you up with a completely blank HSGPL, and dropping you off with a completely working device.

Flashing the DSR on the card

Please respect the copyright of the SNUG. Usage of the ROMs is only allowed for owners of a real HSGPL card.

The first thing to do is to install a DSR on the card. On the SNUG Website you will find a tool called DSRLDR3. This is a generic tool to burn contents onto a flash ROM. Also, you will find on that website the HSGPL rom packages, one for 40 column, one for 80 column setups. For the standard TI (without EVPC) we will go for the 40 column version. You need the "complete package". Make sure that you eventually have 8 files named HSGPL*.P99.

After downloading the files you must transfer them to the PC, either via disks and using a tool on the PC for reading TI-formatted disks, or via a serial connection. The DSRLDR3 program is stored in TIFILES format. Also, the ROMs in the DSR zip file are TIFILES files. You have to import these files into a disk image before using them in the emulation.

Supposed you have all eight files and the DSRLDR3 on your disk image,

  • launch the MESS emulator, selecting the ti99_4a(e) ROMs
  • insert the disk image in the file manager (on floppy 1), or set this in the command line arguments
  • insert the Editor/Assembler cartridge (RPK) in slot 1
  • load the DSRLDR3 program using option 5, "RUN PROGRAM FILE"

When the program starts you have a black screen with blue text on it. At first you have to set the file name of the DSR files to be burned onto the card. Type F for Filename and enter the name of the first DSR file on your disk. My files are named HSGPLDS0 to HSGPLDS7, so I enter DSK1.HSGPLDS0.

Next, type L for Load and confirm the safety dialog. If everything goes well you should observe all files being burned on the card, increasing the number of the file and the target location. If you get a warning message FlashID not recognized you should remove the old contents of the HSGPL by deleting the hsgpl.nv file. It is found in the nvram folder that was automatically created, and there in the system subdirectory.

Finally, a message should appear that all files have been loaded correctly. You can now leave the DSRLDR3 program.

Leave the configuration switch to "Flash" - you are not done yet.

Installing the console GROM content

If you now prematurely switch the HSGPL to on, you will still get a black screen when you restart the emulation. This is correct, as you have just unplugged the console GROMs but have not yet put content into the locations of the HSGPL that should replace these GROMs.

The contents of GROMs 0-2 are contained in one of the flash ROMs as a backup, and we will now copy these data to the proper locations. This must be done with a small assembler program. I wrote such a program that you have to assemble before using.

Type in the code, assemble using Editor/Assembler, and the run the program via option 3. The program will autostart, and after completion of the process, returns to the Master Title Screen. You should now open the OSD menu and change the switch to

HSGPL extension On

Now exit the emulation. Do not reset the emulator unless you have already unplugged the Editor/Assembler cartridge.

MESSUI users (Windows): Please make sure that all cartridges are removed. In doubt, click on the "..." button and select unmount for each cartslot.

When you restart, make sure you do not have any cartridge plugged in, or the HSGPL card will crash (which is a bug in the emulation). Check that you remove Editor/Assembler and that you do not have any -cart1 or similar as command line option.

You know that HSGPL is working correctly when you see a new Master Title Screen which says below the center of the screen:

PRESS ANY KEY, SELECT GRM-BASE

Using the HSGPL for different systems

The HSGPL may be set up for 40 column operation or for 80 columns. The first option is used when you have a standard TI console; the second is recommended for those that have an EVPC video card, which adds 80 column capabilities.

The problem is that either version should not be used with the wrong system. This is handled by MESS, however, so you do not have to care about this. If you have a look at the nvram folder in your MESS installation directory you will notice that it contains subfolders named after the systems that were run. For instance, you will find a ti99_4a and a ti99_4ev folder which correspond to the stock console and to the EVPC-enhanced system.

You should now do the flash process for each system that you want to use the HSGPL card in. Each system gets an individual hsgpl.nv file so there is no mix-up.

The SGCPU

The SGCPU system is a comparably new TI computer system that was designed by the SNUG people and consists of an expansion card that contains the complete chipset of the original TI console. However, instead of the standard GROMs you have to use the HSGPL. And it also requires the EVPC card.

Accordingly, you will have to create a suitable HSGPL card first before you can use the SGCPU. This is done quite easily (when you know it, everything sounds easy):

  • Prepare a HSGPL card on a ti99_4ev system.
  • Copy the hsgpl.nv file to the ti99_4p subdirectory of the nvram directory.