Difference between revisions of "MESS media handling"

From Ninerpedia
Jump to navigation Jump to search
 
Line 17: Line 17:


Note that in versions 0.137 and earlier, the HFDC controller cannot format a disk (because the emulation of the SMC HFC9234 chip lacks formatting support), causing the emulator to crash.
Note that in versions 0.137 and earlier, the HFDC controller cannot format a disk (because the emulation of the SMC HFC9234 chip lacks formatting support), causing the emulator to crash.
=== Setting up a blank hard disk ===
Here is an example for a 20 MiB empty disk. With chdman, create a blank image at first.
chdman -createblankhd newblank.hd 615 4 32 256
The data given in the arguments are cylinders, heads, sectors per track, and sector size. Remember these values.
Now we use Myarc Disk Manager V to format the hard disk. There are disk images somewhere.
mess64 ti99_4a -cart1 editor_assembler.rpk -flop1 mdm150.dsk -hard1 newblank.hd
Enter [[Editor/Assembler]], Option 5, load DSK1.MDM5. When MDM has completed loading it presents a screen for the setting of date and time. You can exit this screen.
Select Utility->Format->Hard, enter 1 as hard drive number
Type in a label for the hard disk behind WDS1., like MYHARD
Use the geometry data from ''createblankhd'' - this is important, other values will make formatting fail! Use your values for other sizes. You can get the values
with chdman -info.
Sectors = 32
Heads = 4
Cylinders = 615
Reserved sectors = 2048
Write precomp = 464
Reduced write current = 464
Retry = 8
Interlace = 3
Step = 1
Enter the magic word "FORMAT" to initiate formatting. Watch formatting cylinder 0...1...2...3... 614
Exit
Sometimes I experience display issues with MDM; the screen does not update with new content. Try BACK (FCTN-9) in that case. Blindly, type C(atalog), H(arddisk), 1 (drive number). You should get an empty disk display.
Exit, Quit, Y, and we are done.

Revision as of 21:26, 9 May 2011

Using your TI and Geneve hard drive in MESS

If you are using a SCSI hard drive on your ASCSI or WHT controller, you can easily hook that drive as is to a SCSI controller of your PC. Using Linux, you can get a sector dump from the /dev/sda device (or similar) by using the dd command. Note that you do not have partitions, so you cannot access the drive by a file system driver. Within Windows, you need a tool to directly access the contents of the drive; Explorer won't do.

If you want to use a SCSI hard drive image in MESS, you cannot simply use your sector dump that you got from your original drive; you have to convert it. We have some instructions how to achieve this.

Formatting disks

MESS requires floppy image files, that is, the contents of the whole disk must be stored in a single file. There are two supported formats, the Sector Dump Format and the Track Dump Format. There are two ways to get a blank new image file:

  • Use imgtool to create a SDF-formatted blank disk.
  • Create an empty file and use the emulation to format the file, just as if you formatted a blank disk.

For the second option you just need a file of the appropriate size. Using Linux you can easily create such an empty file:

dd if=/dev/zero of=my_image.dsk count=<number of bytes> bs=1

For sector dumps, an SSSD disk has 92160 bytes; a DSDD disk has 368640. For track dump images, an SSSD disk has 130120 bytes, while the DSDD disk has 549760 bytes. Once you chose the size you have to use the matching format.

Note that in versions 0.137 and earlier, the HFDC controller cannot format a disk (because the emulation of the SMC HFC9234 chip lacks formatting support), causing the emulator to crash.

Setting up a blank hard disk

Here is an example for a 20 MiB empty disk. With chdman, create a blank image at first.

chdman -createblankhd newblank.hd 615 4 32 256

The data given in the arguments are cylinders, heads, sectors per track, and sector size. Remember these values.

Now we use Myarc Disk Manager V to format the hard disk. There are disk images somewhere.

mess64 ti99_4a -cart1 editor_assembler.rpk -flop1 mdm150.dsk -hard1 newblank.hd

Enter Editor/Assembler, Option 5, load DSK1.MDM5. When MDM has completed loading it presents a screen for the setting of date and time. You can exit this screen.

Select Utility->Format->Hard, enter 1 as hard drive number

Type in a label for the hard disk behind WDS1., like MYHARD

Use the geometry data from createblankhd - this is important, other values will make formatting fail! Use your values for other sizes. You can get the values with chdman -info.

Sectors = 32
Heads = 4
Cylinders = 615
Reserved sectors = 2048
Write precomp = 464
Reduced write current = 464
Retry = 8
Interlace = 3
Step = 1

Enter the magic word "FORMAT" to initiate formatting. Watch formatting cylinder 0...1...2...3... 614

Exit

Sometimes I experience display issues with MDM; the screen does not update with new content. Try BACK (FCTN-9) in that case. Blindly, type C(atalog), H(arddisk), 1 (drive number). You should get an empty disk display.

Exit, Quit, Y, and we are done.