Geneve drive remapping
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
REMAP allows a disk I/O device to be mapped to any DSK1...DSK9 device number. Usage is as follows either in an AUTOEXEC file or at the GeneveOS Command Line prompt.
REMAP <number><DRIVE>
| A | Floppy #1 | Any floppy-only controller |
| B | Floppy #2 | Any floppy-only controller |
| C | Floppy #3 | Any floppy-only controller |
| D | Floppy #4 | Any floppy-only controller that supports 4 floppies |
| E | Internal Geneve Ramdisk | |
| F | Internal Horizon Ramdisk | 8 bit CRU >1400 256K |
| G | Internal Horizon Ramdisk | 8 bit CRU >1600 256K |
| H | Internal Rave Ramdisk | |
| I | HFDC Emulate File | |
| J | HFDC Floppy #1 | |
| K | HFDC Floppy #2 | |
| L | HFDC Floppy #3 | |
| M | HFDC Floppy #4 | |
| N | Internal Horizon Ramdisk | 16 bit CRU >1400 |
| O | Internal Horizon Ramdisk | 16 bit CRU >1600 |
| P | Internal Horizon Ramdisk | 16 bit CRU >1000 |
| Q | Internal Horizon Ramdisk | 16 bit CRU >1700 |
| R | Internal Horizon Ramdisk | 16 bit CRU >1800 |
| S | Internal Horizon Ramdisk | 16 bit CRU >1900 |
| T | PFM FlashDisk #1 | |
| U | Reserved for PFM #2 | |
| V | Reserved for Future Expansion | |
| W | TIPI DSK1 | TIPI CRU >1800 |
| X | TIPI DSK2 | TIPI CRU >1800 |
| Y | TIPI DSK3 | TIPI CRU >1800 |
| Z | TIPI DSK4 | TIPI CRU >1800 |
Examples
REMAP 1W Maps DSK1 to TIPI DSK1 (assumes PI.CONFIG has entry) REMAP 4Q Maps DSK4 to a 16 bit HRD at CRU >1700
(taken from the GeneveOS 7.30 manual)