Difference between revisions of "Video Enhancement Cards"

From Ninerpedia
Jump to navigation Jump to search
(F18A)
Line 19: Line 19:


== OPA TI Image Maker (TIM) 80-Column Board ==
== OPA TI Image Maker (TIM) 80-Column Board ==
TODO
== F18A Video Board ==


TODO
TODO

Revision as of 11:17, 25 April 2018

Video Controller Card (TI)

TODO

Dijit Advanced Video Processor Card (AVPC)

TODO

Foundation 80-Column Card

This card allowed connection of an 80-column, monochrome display to the TI-99/4A. It drew power from the system bus but did not directly interface with the rest of the TI-99/4A computer. All data I/O was through a 25-pin RS-232 serial connector extending out the back of the machine and video went through an RCA connector located beside the data connector. There was no provision for sound. The only device designed to actually use the interface was the Foundation CP/M card, which made the card of no practical use to most TI owners. Very few examples of this card survive. Its primary use was as a terminal screen in 80 columns, a definite benefit of you planned to do a lot of word processing on your TI.

Mechatronics 80-Column Card

TODO

SNUG Enhanced Video Processor Card (EVPC)

See article SNUG Enhanced Video Processor Card

OPA TI Image Maker (TIM) 80-Column Board

TODO

F18A Video Board

TODO