Difference between revisions of "TI-99 sidecar expansion"

From Ninerpedia
Jump to navigation Jump to search
 
 
(5 intermediate revisions by 3 users not shown)
Line 2: Line 2:


== Speech Synthesizer ==
== Speech Synthesizer ==
 
Refer to article on [[Speech]]
The TI Speech Synthesizer was also the only device that remained in side-car position and did not move into the PEB. This allowed users which did not want to expand their system with a PEB to enjoy speech synthesis. Moreover, the synthesizer is comparatively small. The Speech Synthesizer always has to be the closest peripheral device to the console because it draws power through the computer's expansion port.
 
<div style="float:left; padding-right:1em">[[Image:Synth_attached.jpg|200px]]</div>
 
Interestingly, the synthesizer device provided a lid which could be opened - just to find nothing in there. In fact, earlier designs of the Speech Synthesizer included an extension port which allowed speech cartridges to be plugged into the device, just like the cartridges for the console, but much smaller. It seems as if TI just decided to keep the containment, and left away the socket on the synthesizer board.
 
<div style="float:right; padding-right:1em">[[Image:Synth_lid_open.jpg|150px]]</div>
 
The option to extend the vocabulary by modules never materialized, as TI found an easier solution using the Speech Editor cartridge, the Terminal Emulator II cartridge, or the Text-to-Speech disk.  All three of these methods allowed nearly unlimited vocabulary.  None of the planned Speech modules ever made it into production, and no surviving prototypes are known.
 
<div style="float:left; padding-right:1em">[[Image:Synth_adapter.jpg|300px]]</div>
 
From third party, speech synthesizer adaptor cards were offered which allowed to move the synthesizer into the PEB after all, using, for example, a CorComp Triple-Tech card or a Rave Speech Adapter. This is also mandatory for Geneve or TI-99/4P users as they do not have any console to attach the Synthesizer to. The circuit board had to be removed from the chassis of the Synthesizer.
 
<div style="float:right; padding-right:1em">[[Image:Synth_board.jpg|200px]]</div>
 
Near the end of Texas Instruments' engagement in the Home computer market, the Speech Synthesizer was packed with cartridges making use of the synthesizer hardware, making it probably one of the most popular pieces of hardware. Many people rushed out to purchase as many modules they could while they still had the free speech synthesizer offer available.
 
More information about the processor used by the Speech synthesizer can be found in the [[internals]] section.
<div style="clear:both"/>


== RS-232 Expansion ==
== RS-232 Expansion ==
Line 38: Line 18:
== Single-Density Floppy Disk Controller ==
== Single-Density Floppy Disk Controller ==


This peripheral adds the capability to connect up to three Single-Sided, Single-Density (SSSD) disk drives to the computer.  It has its own power supply and must always be the last peripheral in the peripheral expansion chain.  The disk drives can be formatted as either 35 or 40 tracks of nine sectors each.  As 35-track drives were no longer standard at the time it was released, all known disks used the 40-track format.  
Catalogue PHP1800
 
This peripheral adds the capability to connect up to three Single-Sided, Single-Density (SSSD) disk drives to the computer.  It has its own power supply and must always be the last peripheral in the peripheral expansion chain.  The disk drives can be formatted as either 35 or 40 tracks of nine sectors each.  As 35-track drives were no longer standard at the time it was released, all known disks used the 40-track format.


== Video Controller ==
== Video Controller ==
Line 46: Line 28:
== Thermal Printer ==
== Thermal Printer ==


TODO
[[Image:Thermalprinter.jpg|350px|right]]
 
Catalogue PHP1900
 
The first printer that Texas Instruments made available for the TI99/4 was a 32 column thermal printer which attached to the right hand side port. In a daisy chain the printer had to be the last unit as there was no pass through.
 
Routines were built in to allow you to print screen graphics to the Thermal Printer. The character set was a 5x7 matrix.
 
The TI paper unfortunately suffered from fading.


== GROM Box ==
== GROM Box ==


TODO
TODO
[[Category:Expansion]]

Latest revision as of 21:35, 21 September 2017

The TI-99 sidecar expansion components were originally released to provide expansion capability to the TI-99/4. Several expansion devices were designed, though not all were released commercially. At least one, the P-Code Peripheral, may be vapor ware. Each of the devices, with the exception of the Disk Controller, allows the bus to pass through to additional peripherals. TI rethought their expansion strategy when the FCC tightened RFI requirements at the beginning of 1982. The train of peripherals did not meet the requirements for an FCC Class B device, and so most of them were discontinued in favor of the PEB.

Speech Synthesizer

Refer to article on Speech

RS-232 Expansion

This peripheral adds a pair of RS-232C ports to the computer. No provision is made for parallel devices. It has its own power supply and can be placed anywhere in the peripheral chain after the Speech Synthesizer and before the Disk Controller.

32K Memory Expansion

This peripheral adds 32K of 8-bit CPU memory to the computer. It has its own power supply and can be placed anywhere in the peripheral chain after the Speech Synthesizer and before the Disk Controller. It requires specialized software to access it, as it is not recognized by TI BASIC. Several cartridges make use of the additional memory: TI Extended BASIC, TI Writer, TI Multiplan, Editor Assembler, Mini Memory, and both versions of TI LOGO (I and II).

HexBus Interface

The TI HexBus Interface was effectively the last peripheral device TI specifically developed for the TI-99/4A. Other items were in development at the same time, but they could be used with both the TI-99/4A and the TI-99/8. It added the capability to connect HexBus peripheral devices while allowing concurrent connection with a PEB. Unfortunately, TI withdrew from the home computer market before the device went into serial production, so only a few prototype devices survive. The HexBus Interface was eventually reverse-engineered by TI enthusiasts in Germany, though they also only produced a few of their HexBus Interface clones (the last count stood at three, though they were willing to produce more).

Single-Density Floppy Disk Controller

Catalogue PHP1800

This peripheral adds the capability to connect up to three Single-Sided, Single-Density (SSSD) disk drives to the computer. It has its own power supply and must always be the last peripheral in the peripheral expansion chain. The disk drives can be formatted as either 35 or 40 tracks of nine sectors each. As 35-track drives were no longer standard at the time it was released, all known disks used the 40-track format.

Video Controller

The Video Controller allowed connection of several models of videotape recorders and laser disk players to be connected to the TI-99/4A. It was designed to allow interactive instruction using a combination of computer software running on the machine and video instruction materials retrieved from the tape or laser disk as part of the lesson. The Video Controller was listed on TI price lists in 1981, but the device failed the necessary FCC certification, and so could not be sold to consumers. It could be used in industrial environments, but was apparently never put into production for that market. Only a few prototypes survive. It maintains full forward compatibility with the Video Controller Card for the PEB.

Thermal Printer

Thermalprinter.jpg

Catalogue PHP1900

The first printer that Texas Instruments made available for the TI99/4 was a 32 column thermal printer which attached to the right hand side port. In a daisy chain the printer had to be the last unit as there was no pass through.

Routines were built in to allow you to print screen graphics to the Thermal Printer. The character set was a 5x7 matrix.

The TI paper unfortunately suffered from fading.

GROM Box

TODO