Jump to navigation Jump to search
Revision as of 17:07, 20 May 2014 by Mizapf (Created page with "=== 0.145 === If you come from an earlier version of MESS than 0.145, you should consider this: * Hard disks are now stored in CHD version 5 format. You must use '''chdman''' t...")
If you come from an earlier version of MESS than 0.145, you should consider this:
- Hard disks are now stored in CHD version 5 format. You must use chdman to convert your hard disk image if they are stored as version 4 or lower.
- The HSGPL stores the contents of its Flash ROMs as separate files. You should reinstall your HSGPL; alternatively you must split the file into four pieces at offsets 0x000001 (DSR), 0x080003 (U4), 0x100005 (U1), and 0x180007 (U6); each file is 512K + 2 bytes long. Start MESS and close it again to find out how the files are named.
- Configuration has considerably changed. The expansion cards are plugged in as separate devices that you either specify on the command line (like -peb:slot8 hfdc) or by using a frontend like QMC2 where you can specify "slot options".