Geneve External bus definition
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
This is the pin assignment of the PEB slot as used by the Geneve. Pins 1 and 2 are located at the back, pins 59 and 60 are located at the front. The diagram below is seen from above into the slot.
Meaning | Type | Pin | Pin | Type | Meaning |
Unregulated +5 V | - | 1 | 2 | - | Unregulated +5 V |
GND | - | 3 | 4 | I | /READY |
GND | - | 5 | 6 | O | /RESET |
GND | - | 7 | 8 | O | SCLK; not connected; AMD for GenMod |
/LCP; not used; pulled up to +5V; AME for GenMod | O | 9 | 10 | I | AUDIO |
/RDBENA; not connected | - | 11 | 12 | I | PCBEN, not used; pulled up to +5V |
/HOLD | I | 13 | 14 | O | /ABUS-HOLDA |
/SENILA; not used; pulled up to +5V | O | 15 | 16 | O | /SENILB; not used; pulled up to +5V |
/INTA | I | 17 | 18 | I | /INTB |
D7 | I/O | 19 | 20 | - | GND |
D5 | I/O | 21 | 22 | I/O | D6 |
D3 | I/O | 23 | 24 | I/O | D4 |
D1 | I/O | 25 | 26 | I/O | D2 |
GND | - | 27 | 28 | I/O | D0 |
A14 | O | 29 | 30 | O | A15 |
A12 | O | 31 | 32 | O | A13 |
A10 | O | 33 | 34 | O | A11 |
A8 | O | 35 | 36 | O | A9 |
A6 | O | 37 | 38 | O | A7 |
A4 | O | 39 | 40 | O | A5 |
AB2 | O | 41 | 42 | O | AB3 |
AB0 | O | 43 | 44 | O | AB1 |
AMB | O | 45 | 46 | O | AMA |
GND | - | 47 | 48 | O | AMC |
GND | - | 49 | 50 | O | CLKOUT |
/CRUCLK | O | 51 | 52 | O | DBIN |
GND | - | 53 | 54 | O | /WE |
CRUIN | I | 55 | 56 | O | /MEMEN |
Unregulated -12V | - | 57 | 58 | - | Unregulated -12V |
Unregulated +12V | - | 59 | 60 | - | Unregulated +12V |