Difference between revisions of "GeneveOS Device Operation"

From Ninerpedia
Jump to navigation Jump to search
Line 65: Line 65:
| colspan="3" | Character count
| colspan="3" | Character count
| Status byte
| Status byte
| Name length
| Name
|-
|}
After the operation, the PAB contains information about the results of the operation.
== Operations ==
=== OPEN ===
Open a record-oriented file. A file must be opened before it can be read from or written to. This operation is not required for flat memory image files.
The PAB must be set up prior to invoking the operation:
'''IN'''
{| class="plainc" style="margin-left:1%"
|-
! width="4%" | 00
! width="4%" | 01
! width="4%" | 02
! width="4%" | 03
! width="4%" | 04
! width="4%" | 05
! width="4%" | 06
! width="4%" | 07
! width="4%" | 08
! width="4%" | 09
! width="4%" | 0A
! width="4%" | 0B
! width="4%" | 0C
! width="4%" | 0D
! width="4%" | 0E
! width="4%" | 0F
! width="4%" | 10 ...
|-
| '''00'''
| Mode
| -
| colspan="3" | -
| colspan="2" | Records to reserve
| colspan="2" | File record length
| -
| colspan="3" | -
| -
| Name length
| Name
|-
|}
After the OPEN operation has completed, the PAB delivers information about the result:
'''OUT'''
{| class="plainc" style="margin-left:1%"
|-
! width="4%" | 00
! width="4%" | 01
! width="4%" | 02
! width="4%" | 03
! width="4%" | 04
! width="4%" | 05
! width="4%" | 06
! width="4%" | 07
! width="4%" | 08
! width="4%" | 09
! width="4%" | 0A
! width="4%" | 0B
! width="4%" | 0C
! width="4%" | 0D
! width="4%" | 0E
! width="4%" | 0F
! width="4%" | 10 ...
|-
| -
| -
| Error code
| colspan="3" | -
| colspan="2" | -
| colspan="2" | Actual record length
| -
| colspan="3" | True record length
| -
| Name length
| Name length
| Name
| Name
|-
|-
|}
|}

Revision as of 18:24, 22 July 2016

Accessing devices (floppy disk, hard disk, serial connector, printer) is possible in GeneveOS via XOP calls.

User-task XOPs

User-task XOPs are available for use in application programs. Here is a typical example:

PABADD EQU  >F180   
FILE   DATA 8
...
       LI   R0,PABADD
       XOP  @FILE,0
       MOVB @PABADD+2,R0
       JNE  ERROR
       ...

Similar as with the TI-99/4A device service routine concept (DSR), a Peripheral Access Block (PAB) must be set up prior to invoking the XOP.

Device Service Routine Call

Input Output
R0 Pointer to PAB -

The actual operation is contained in the Peripheral Access Block (PAB).

Peripheral Access Block

While the TI-99/4A DSRs expect the PAB to be stored in VDP RAM, the Geneve OS DSRs use CPU RAM for the PAB, which means the PAB need not be copied to the video RAM before use. Also, you can choose to have the I/O buffers in VDP or CPU RAM.

The general layout of the PAB is as follows:

00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 ...
Opcode Mode Error code Buffer address Record number Record length Memory type Character count Status byte Name length Name

After the operation, the PAB contains information about the results of the operation.

Operations

OPEN

Open a record-oriented file. A file must be opened before it can be read from or written to. This operation is not required for flat memory image files.

The PAB must be set up prior to invoking the operation:

IN

00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 ...
00 Mode - - Records to reserve File record length - - - Name length Name

After the OPEN operation has completed, the PAB delivers information about the result:

OUT

00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 ...
- - Error code - - Actual record length - True record length - Name length Name