Search results

| 1 | Flashdisk bank #1

<code>110 A=1</code> <code>120 B=1</code>

res = bread(argv[1], 0, 0, rbuf); printf("Copying sector %d of %d\r", i+1, sect);

The first issue, Volume 1 No. 1 was dated August 1985 and the last issue, Volume 13 No. 7 was dated Septemb

LOGO 1 had a number of bugs which were addressed in LOGO II but at the last minute ......the primitive MS (makeshape) which works in a defined procedure in LOGO 1 can only be used in direct mode in LOGO 2. Thus one of the sample procedure

...on IF X=1 THEN 100 is acted upon by the computer only if the expression (X=1) is TRUE. A TRUE expression is given a value of -1 while a FALSE expression is given a value of zero.

| 1 ...of P2-P4) for the keys "=", ".", ",", "M", "N", "/", fire button Joystick 1 and 2

! 1 ! 1

Gap 1 With Gap 1 being 16 bytes long this leaves '''192 bytes''' for Gap 4.

...t terminate. We have to turn it off, either by using CALL LOAD to set Tone 1 and Noise volume to zero... or use a negative CALL SOUND: CALL SOUND(-1,110,0)

120 FOR A=1 TO LEN(A$) 130 B$=SEG$ (A$, A, 1)

...at all cards must decode AMD and AME also. The usual decoding requires AME=1 and AMD=0. ...only access 64 KiB. All P-Box cards should decode AMA, AMB, and AMC as 1/1/1.

OPEN #1:"SPEECH",OUTPUT PRINT #1:"I CAN SAY ANYTHING YOU WANT ME TO"

* (1) 32Kx8 SRAM (Hitachi 62256 compatible) === Step 1 ===

1. Always 0 (for record 0) Records 1 thru 127:

...n of the data. In fact, these files are commonly 8193 bytes long, that is, 1 byte plus the fixed size of a ROM (8K). | style="width:7em" | 1

100 CALL KEY(1,A,B) 110 IF A+1<>1 THEN 100

| - || EQ=1 if time is valid | - || EQ=1 when successfully parsed

expression is true, the computer will jump to line-1, which follows the word THEN. If the condition is 140 N=N-1

This is a 2-in-1 card: it consists of a USB card, and a SmartMedia interface card, sharing t * Philips ISP1161 USB 1.1 controller.

However, the top of the screen is Row 1, so to move down the screen the row must be increased : move the joystick d <code>100 CALL JOYST(1,COLRET,ROWRET)</code>

* 40 pin socket - (MT40) - qty 1 * +5V Regulator, 1 Amp - (7805T) - qty 1

If in a program the colours of character sets 1 to 8 are regularly changed. 800 FOR T=1 TO 8

...random value to address >6000 (switch to bank 0) or >6002 (switch to bank 1). ''exbasicg'' is the GROM dump. Unlike the GRAM Kracker format (which is a <?xml version="1.0" encoding="utf-8"?>

| colspan="2" style="border: 1px solid black; padding:0.2ex" | Gap 1: 0x00 (16) ...e="border: 1px solid black; padding:0.2ex" | ID Address Mark (IDAM): 0xFE (1)

*PHA2000 Dual Cassette cable. Documentation card 1037175-1. Assy/pack 1037196-1. *PHA2600 Beginner's Basic Manual (99/4) 1037107-1.

| rowspan="1" | Reserved | rowspan="1" class="descr" | Operating system

1. Rising phrase mode ...y used for vowel allophones. These allophones are all grouped in the range 1 through

! 0 !! 1 !! 2 !! 3 !! 4 !! 5 !! 6 !! 7 | colspan="2" | Color 1

...s the binary number 11111111, which in decimal form is: 128+64+32+16+8+4+2+1 =255 ...e two required colours into binary numbers (binary 0 has a colour value of 1):

|| 1 || 1

...(bit 3), and a TB 3 will make EQ=0, while a not pressed button would be EQ=1. ...one could enable interrupts from the real-time clock by setting bit 11 to 1. The setting as shown here is the typical setting when working in MDOS.

...ro) does NOT equate to zero - you must use indirect means such as IF A+1 = 1. DELete SHIFT F FCTN 1

{| border="1" | 1: GND

* 8 in 1 RASMUS arcade games, published by arcadeshopper.com * 3 in 1 RASMUS scrolling games, published by Jim Fetzner

| Floppy #1 | HFDC Floppy #1

* Press SPACE or any other key. You should see PRESS 1 FOR GRAM KRACKER, PRESS 2 FOR <your cartridge> * Select GRAM KRACKER by pressing 1. The main screen should appear, as shown here.

The bit at '''CRU address 0010''' (or bit 8 at base 0) is set to 1 by default. The interrupt inputs at the 9901 are all negative logic, so we The bit is reset to 1 with the next SBZ on the control bit 1.

<code>200 FOR I=-25 TO -64 STEP -1</code> <code>200 FOR I=16383 TO 16343 STEP -1</code>

<code>FOR C=1 TO X</code>

...f CALL FILES(0) ( Frees up another 250 odd bytes of memory from CALL FILES(1)) ...gnificant, so all values 0-127 are treated as 0 and 128-255 are treated as 1.

...der: 1px solid black; padding:0.2ex; width:4%; background-color:#dddddd" | 1 ...r: 1px solid black; padding:0.2ex; width:4%; background-color:#dddddd" | n-1

You will recall that TEST is going to make the compiler load CONIO from Disk 1. so make sure that the file CONIO is on a disk in drive one! and that the i 110 FOR ROW=1 TO 24

MOVE 100 FROM @SLPAB TO @SLPAB+1 Clear out PAB ST @FAC+1,@SLPAB+NLEN

| class="descr" | Slow RAM (1 ws) | class="descr" | Slow RAM (1 ws)

...ormation, in particular the sector number, track number, side number (0 or 1), CRC code (for error checking), and bit sequences to allow the controller ...ght expect, although the computer usually will read them in sequence as 0, 1, 2 ... 8. But the sequence as shown here has an important benefit: The comp

This program will backup any disk using sector I/O; both 1 and multiple drives and single/double sided. Written in UCSD Pascal for the buffer:array[1..5120] of integer;

...y this is either because Switch 4 is not in the appropriate position (Bank 1 or Bank 2), or because a cartridge is plugged into the Gram Kracker. When a ...th switch into the "Loader On" position and then reset the system. Choose "1 FOR GRAM KRACKER" at the menu. Once in there choose option 3 to "Init Modul

dd if=/dev/zero of=my_image.dsk count=<number of bytes> bs=1 Select Utility->Format->Hard, enter 1 as hard drive number

The number N must be a number and not a variable, and lie between 1 and 255. It is possible to have several files open at once (eg to CS2, a pr ...opened, you use the PRINT command, but add the file identification: PRINT #1:

<code>140 IF S<1 THEN 110</code> <code>180 VR=VR+1</code>

This is the pin assignment of the PEB slot as used by the Geneve. Pins 1 and 2 are located at the back, pins 59 and 60 are located at the front. The | style="text-align:right" | 1

...cles: get MOVB @,R3, get the source address, read from the source address, 1 WS for this external access, write to register 3. Then the next command is ! 1 !! 2 !! 3 !! 4 !! 5 !! 6 !! 7 !! 8 !! 9 !! 10 !! 11 !! 12 !! 13 !! 14 !! 15

{| class="plainc" style="margin-left:1%" ! 1

multiplied by $1,000. For example, the number 4 represents 4 × 4 × $1,000 or $16,000. A list of the city | 2 || 1 || 3 || 3 || 2 || 2

...xbasicd.bin'' is the ROM dump of the CPU address area >6000 to >7FFF (bank 1) <?xml version="1.0" encoding="utf-8"?>

''Solution'': In mess.ini, set mouse to 1 or use "-mouse" as argument on startup. == Parsec only runs in cartridge slot 1 (new cartridge system) ==

...M circuit. The video memory is implemented by 8 circuits of TMS4116 (16K x 1); that is, each circuit hold exactly one bit of each byte. ...d circuits should cause these stuck-at-0 symptoms; we never saw a stuck-at-1 or other cross-dependencies.

...the exchange of programs between members, either on a 2 for 1 (later 4 for 1) or cash basis.

We proceed directly to TI BASIC by pressing 1. CALL DIR(1)

# Strip 1/2 inch of the outer casing away, exposing the center conductor surrounded b # Strip away about 1/4 inch of the insulation on the center conductor.

The [[Triple Tech]], as the name implies, is a 3-in-1 card for the TI-99/4a. The card has a real time clock/calendar function tha WK$=SEG$(WK$,1,60)

| Text 1 | 1

100 FOR A=1 TO 5 100 X=(N=2*INT(N/2))+1

...sing Extended Basic. Later, XB must be reloaded into the PGRAM+ GRAM bank 1 from disk. ==NO access to TO GROMS 0, 1, and 2 with a PGRAM+==

...when we do not use interlace or whether it still alternates between 0 and 1. ...ver, so we need an upper bound for our iterations. If the bit is locked to 1 it will quickly terminate, so the number of iterations should not be too lo

Scroll down to "OSD VIDEO OPTION"; change '''window''' to '''1''' to get a windowed output, otherwise it is fullscreen. In the next sectio === Example 1 ===

....png|300px|thumb|right|Screen grab of version 5 Funnelweb editor Help page 1]] ===(ctrl-1)===

| 3018 || TI || [https://4apedia.com/index.php/Video_Games_1 Video Games 1] .../4apedia.com/index.php/Addition_and_Subtraction_1 Addition and Subtraction 1]

130 FOR A=1 TO 200 :: NEXT A ! Delay loop

1 571.4 6 421.1

Compared to the original SPECTRA¹ library I wrote in 2009, I'm taking a different approach this time. '''If you want to learn more about the original SPECTRA¹ manual, then please check [http://spectra99.sourceforge.net/SPECTRA_r

Go to the command prompt with ESC and key in cd 1. ...welweb editor, hold down the ALT key and then press numeric keypad numbers 1 then 3 then 0 and release ALT.

000020: 00 17 a2 f0 b7 52 4f 57 b3 c8 01 31 b6 b5 c7 04 .....ROW...1.... 000040: 01 31 b1 c8 02 32 30 00 .1...20.

...to the port is the value that is shown on its pin. If we want to output a 1 on P6, we have to use The TB operation should return the 1 which the previous SBO has set.

...me value. For example, when the CPU wants to read from >1000, A3 is set to 1 while the remaining address lines are set to 0. Notice that the READY line may have any value (0 or 1) at other times; we symbolize this with the hashed stripe.

s=01 (sector 1) ? 00 00 01 01 6e e4 (TRACK 0, SIDE 0, SECTOR 1, LENGTH 256, CRC 6ee4)

-9.9999999999999E127 through -1.0000000000000E-128; zero; and then +1.0000000000000E-128 on 1. The number 12710 is represented as:

.... When selecting LOAD or EDIT, the editor is loaded from the disk in drive 1. The editor's file name is EDIT1. Using the editor you create files of 990 ...art of the E/A. First, the assembler must be loaded from the disk in drive 1. The assembler consists of the two files ASSM1 and ASSM2.

...ns long. These 80 columns are displayed in three windows, covering columns 1 to 40, 20 to 60 and 40 to 80. ...RM FEED at the END of printing? Make the last line of your letter etc: .PL 1 and the form feed is suppressed! NB: Do not forget to reset PL if you have

The emulated keyboard is a set of digital switches which report 0 or 1, according to being released or pressed. In MESS, they are queried just as ...is. On the other hand, everything is good when I want to type "!" as Shift-1 because there is a match. Essentially, when I use my QWERTZ keyboard and I

| colspan="2" rowspan="5" | Directory 1 name | colspan="2" | Sector number of FDIR of dir 1

...st RAM''' is all memory with 0 wait states (SRAM), while '''Slow RAM''' is 1 wait state RAM, offered by the DRAM chips. The on-chip RAM is not considere PC architectures with the Intel 8086 had an address bus of 20 bits (1 MiB address space), the Intel 80286 had an address bus width of 24 bit whic

Bit 1, value 64 = screen enabled Bit 7 is 0 or 1 having a digital value of O or 1,

* A 1,800 plus page searchable alphabetical List of TI information in PDF format.

imgtool create v9t9 sssd.DSK --sides=1 --tracks=40 --sectors=9 imgtool create v9t9 sssd.DSK --sides=1 --tracks=40 --sectors=18

120 OPEN #1:"EXPMEM1",OUTPUT OPEN # 1:" MINIMEM", APPEND

...lowing 8 characters were in a set, so that characters 32 to 39 were in Set 1 and 40 to 47 were in set 2 and so on. TI Basic allowed 16 sets, but in Ex

...u booted SYSTEM/SYS from DSK1, Answer 1 to "Select disk drive to load from(1-9)?" ...stribution disk image comes with [[FORM3MEG]], however the Geneve 0.98 and 1.00 boot roms are not capable of booting from the large volume it creates. I

CALL D(10,4,5,1/3) F MUST be a NUMERIC VARIABLE. It takes a value of 1 if

The vowel sounds come first (1-72) and form most of the allophones. 1. AE1 as in ".A.ddition"

{| border="1" cellpadding="2" cellspacing="0" | 1

| 1

| style="width:7em" | 1

...switch to the new location. My advice is to use the cartridge in position 1 or 3 so that you can rapidly move the switch. If you put it in slot 2 you m ...'', '''GROM''' and type in the address in the second slot with a prefixed "1". Example for Moon Mine: 1A000

* Data Systems: Chemtutor 1, Concordia, Life Expectancy * Intersoft: Defend the Cities 1 and 2, Galactic Gunfight, Meteor Storm

| style="width:7em" | 1

100 CALL SPRITE(#1,32,1,100,1,0,60) :: FOR C=1 T0 71 :: NEXT C :: CALL POSIT ION(#1,C,C) :: CALL DELSPRITE(#1) :: PRINT C :: GOTO 100

| style="width:7em" | 1

| style="width:7em" | 1

| style="width:7em" | 1

...umbers on the bottom row. They also completely skipped references to pins 1 and 26. Once these inconsistencies are noted, the pin-out is in accordance

220 PRINT USING 200:-15,-11,1 <code>-15x^2-11x +1</code>

...32K Memory Expansion card, which placed RAM in memory locations >2000¹ - >3FFF and >A000 - >FFFF. Using this RAM opened up the world of asse ¹<small>Hexadecimal notation in the TI world was marked with a greater-

PAGE 1= EX BAS PROGRAM PAGE 1: For your machine code routines

The Triple Tech, as the name implies, is a 3-in-1 card for the TI-99/4a. The card has a real time clock/calendar function tha

...ses an Intel 8085, 8 bit microprocessor. The disk system uses the Osborne 1 format.

| style="width:7em" | 1

Introduced in Vn 3.03, Archiver now accepts drives 1-Z, for Ramdisk users.

...ck Runner is to move your character around the playing area usinq joystick 1 or 2, picking up a specific number of diamonds to enable you to move to the

...heral_Box_Slot_Concept|Flex Cable Interface]] traditionally goes into slot 1, even though each slot is connected in parallel with all lines. Accordingly | Myarc Memory expansion card MEXP-1

Press a key to obtain the menu selection and then press key 1 to obtain TI BASIC READY. Each time it is called from ExBas it toggles the cassette No 1 on and off. When it goes off it also cuts the sound port to your TV/Monitor

Directions include Swim. Eat, Climb, Left, Right. 1, 2. and 3. Suggested for age 4 up,. Suggested for age 4 to 7, but some 1 year olds could benefit with supervision.

1 through 240, is the [[Standard allophone codes for TI Text to Speech—Engl

...rs, so dropping the cable removed yet another source of instabilities.¹ ¹<small>At least for my system.</small>

...Extended BASIC you will see the XB Selection Screen. If you select option 1 or 2 the Extended BASIC environment is destroyed and will need to be reboot * [[TI Forth]] = Place the disk in Drive 1 (no file name is appropriate)

The module is known to exist only as 8k GPL code, either as 2&times;4k or 1&times;8k eprom. Written in GPL it was a very early module written in GPL wh

120 FOR T=1 TO 12

* Myarc Memory expansion card MEXP-1 (512 MiB), with the internal 8 KiB DSR ROM which allows for testing and par * The SuperAMS card in its 1 MiB configuration.

...ng" with TI Disk Manager 2, you must then use Forth itself to copy Screens 1 to 9. To do this use: Insert master disk in drive 1

CALL DIR(1) Check the contents. We want to make sure that writeconfig is 0, since a 1 causes all changes of inserted media to become saved in this file, which is

! 0 !! 1 !! 2 !! 3 !! 4 !! 5 !! 6 !! 7 | 1

110 IF B<'>1 THEN 100 120 B=POS("ESDX",CHR$(A),1)

0 1 2 3 4 5 6 7 8 9

...etails. Sounds like something that should be in his bio. Barry's Comments #1 is a reference to a character in "Dr. Who", and was the BBS handle I used a

* Del is FCTN-1

| style="width:7em" | 1

| '1'

This card connects the TI-99/8 with a Revision 1 motherboard to the PEB. It contains no specialized chips and could be easi ...is possible to build an [[adapter]] to use this Interface with a Revision 1 motherboard.

...The mouse is queried by creating a rising edge on selecting joystick lines 1 and 2. This was incompletely implemented, just checking for a selection of

...he problem appeared that many programs assume to be loaded from disk drive 1. The emulate file can be mounted and emulate the disk drive.

...ding of a Chinon 5.25" floppy disk drive, run by a Geneve 9640 with a DDCC-1 controller. As usual, the time advances from left to right. * At the left side (1) there is the start-up sound of the drive. When the spindle accelerates, th

'''1. Cartridge tools''' * [http://ftp.whtech.com/pc%20utilities/TI99-PC%203.2.1.%20Password%20%27TI99%27.rar TI99-PC]

* Press 1 for TI-BASIC ...is bank (1) will be selected on the Master Title Screen when you press the 1 key. Pressing < (less than) will put you one bank backwards.

...ic chip on the board, but in fact it is best described as a '''synchronous 1-bit serial bus'''. In that sense it may be compared to the currently widesp

1) Wrong type of Keyboard - is it an XT type keyboard?

1) To import a file from DOS to a TI99-PC image you will choose, from the Mai ...PC Image file to a PC99 image you will choose, from the Main Menu, option #1 and then option #3.

'''Binary''': A number system based on two digits. 0 and 1. The internal language and operations of the ...ic numeric or string value. A numeric constant is any real number, such as 1.2 or

Dennis is the father of Chris Faherty who wrote TI Artist Vn 1 when he was aged 14.

1) There must be a program written on the PC that understands PC99/V9T9 image

Some versions of the HFDC shipped as "HDCC-1 Winchester Card / Hard Disk Controller Card with Floppy Disk Option". The p ...n control up to (8) floppy drives. The additional FDC would control drives 1-4, the HFDC would control drives 5-8.

[[File:1.jpg|200px]] * Select '''1''' for ''CONFIG Loader/Editor''

The answer at this point is no. I gave this a try with a Wine 1.0 build and it installed and laucnhed with no problems. But the redraw of c # Open the the RS232 port with: OPEN #1:"RS232.EC"

...orking disk. Load/edit/save your file, again, exchange your disk with Disk 1, load the assembler. Then exchange your disks a last time, enter the source ====Can I use 3.5", 1.44mb (HD) diskettes in either my 720k or 1.44mb drives?====

Copies the word (two bytes) in register 1 into register 2. If register 1 contains the word >1234, register 2 now also contains >1234. ...rements R2 to >B102. The increment is 2 for a word operation (2 bytes) and 1 for a byte operation.

Requires Joystick 1. Shoot aliens (and captured humanoids that have been taken to the top of t joystick to send him where you want. When he enters a tunnel where Monster 1 is lurking, the monster

Usually the Flex Cable Interface was placed in slot 1 (leftmost slot) of the PEB.

...s can be understood as different editions of a game or program, like "Part 1: First Encounter", "Part 2: The Hunt Continues", "Part 3: The Endgame". Eac

* load-interrupt is synchronized (only 1 pulse)

space .1 . 1.0

slope < (pitch - 1) * 16

...n PC99. Full cassette support for 99/2(32K). Unneeded cassette channel (Ch.1) removed. | Tag for MEXP-1 RAM (led to error on start)

...mbo drive that has both a 3.5" and 5.25" drive in it. Combo drives are all 1.2mb and they don't work with the TI. 1) Webpages: http://www.unige.ch/medecine/nouspikel/ti99/webpages.zip

...it number into one of several active lines. With a 000 at its inputs, line 1 gets active; a 001 turns on line 2, and so on, until 111 which turns on lin